Liprofaele tsa Sebopeho sa Tšepe tsa Europe EN S355JR I beam
| Thepa | Tlhaloso / Lintlha |
|---|---|
| Maemo a Boitsebiso | EN S355JR (tšepe ea sebopeho e matla haholo) |
| Matla a Tekanyo | Matla a ho Thanya 470–630 MPa |
| Litekanyo | IPE 80–IPE 600 / IPN 80–IPN 550 (ka EN 10365 mefuta e tloaelehileng) |
| Bolelele | E tloaelehileng: 6 m / 12 m; Bolelele bo ikhethileng ho fihlela ho 24 m boa fumaneha |
| Mamello ea Tekanyo | E latela EN 10034 bakeng sa likarolo tsa sebopeho sa I tse phutholohileng ka hot-rolled |
| Setifikeiti sa Boleng | Tlhahlobo ea motho oa boraro ea SGS, BV, TUV ea EN 10204 3.1 / 3.2 e fumaneha |
| Qetello ea Bokaholimo | Tšepe e ntšo, galvanizing e chesang, sekoahelo sa epoxy, ho phatloha ha lehlabathe SA2.5 |
| Likopo | Meaho e jarang mojaro o boima, matlo a polokelo, mehaho ea indasteri, marokho, likereine le meralo ea mechini |
| Tekanyo ea Khabone (Ceq) | ≤0.47% (e netefatsa ho tjheseletsa ho tšepahalang tlasa ditshebetso tsa ho tjheseletsa tsa EN & AWS) |
| Boleng ba Bokaholimo | Bokaholimo bo boreleli bo se nang mapetso, mafome le li-lamination; mamello ea ho otloloha ≤2 mm/m |
| Thepa | Tlhaloso | Tlhaloso |
|---|---|---|
| Matla a Tekanyo | ≥355 MPa | Boemo ba khatello ea maikutlo boo ho bona phetoho ea kamehla e qalang |
| Matla a tšepe | 470–630 MPa | Moroalo o moholo oa ho thaepa oo tšepe e ka o mamellang pele o robeha |
| Ho lelefatsa | ≥22% | Bongata ba phetoho ea polasetiki pele e robeha, e lekantsoe ho feta bolelele bo tloaelehileng ba gauge |
| Bothata (Brinell) | 140–180 HB | Mefuta e tloaelehileng ea thatafalo bakeng sa tšepe ea sebopeho ea S355JR |
| Khabone (C) | ≤0.22% | E boloka ho tjheseletsa le ho tiea maemong a matla a phahameng |
| Manganese (Mn) | 1.00–1.70% | E eketsa matla, ho tiea le ho hanyetsa tšusumetso |
| Sebabole (S) | ≤0.035% | Sebabole se tlase se ntlafatsa ho ductility le ho thibela ho robeha ha bonolo |
| Fosforase (P) | ≤0.035% | Phosphorus e tlase e ntlafatsa ho tiea le boleng ba ho weld |
| Silicone (Si) | ≤0.55% | E eketsa matla 'me e sebetsa e le deoxidizer ho etseng tšepe |
| Sebopeho | Botebo (ka hare) | Bophara ba Flange (ka hare) | Botenya ba webo (ka hare) | Botenya ba Flange (ka hare) | Boima (lb/ft) |
| W8×21 (Boholo bo fumaneha) | 8.06 | 8.03 | 0.23 | 0.36 | 21 |
| W8×24 | 8.06 | 8.03 | 0.26 | 0.44 | 24 |
| W10×26 | 10.02 | 6.75 | 0.23 | 0.38 | 26 |
| W10×30 | 10.05 | 6.75 | 0.28 | 0.44 | 30 |
| W12×35 | 12 | 8 | 0.26 | 0.44 | 35 |
| W12×40 | 12 | 8 | 0.3 | 0.5 | 40 |
| W14×43 | 14.02 | 10.02 | 0.26 | 0.44 | 43 |
| W14×48 | 14.02 | 10.03 | 0.3 | 0.5 | 48 |
| W16×50 | 16 | 10.03 | 0.28 | 0.5 | 50 |
| W16×57 | 16 | 10.03 | 0.3 | 0.56 | 57 |
| W18×60 | 18 | 11.02 | 0.3 | 0.56 | 60 |
| W18×64 | 18 | 11.03 | 0.32 | 0.62 | 64 |
| W21×68 | 21 | 12 | 0.3 | 0.62 | 68 |
| W21×76 | 21 | 12 | 0.34 | 0.69 | 76 |
| W24×84 | 24 | 12 | 0.34 | 0.75 | 84 |
| W24×104 (Boholo bo fumaneha) | 24 | 12 | 0.4 | 0.88 | 104 |
| Paramethara | Mefuta e Tloaelehileng | Mamello ea EN 10034 | Lintlha |
|---|---|---|---|
| Botebo (H) | 100–600 mm (sebaka sa IPE/IPN) | ±3 mm | E tlameha ho fihlela boholo bo tloaelehileng bakeng sa ts'ebetso ea sebopeho |
| Bophara ba Flange (B) | 55–250 mm | ±3 mm | E netefatsa kabo e tsitsitseng ea mojaro le ho nepahala ha ho tjheseletsa |
| Botenya ba webo (t_w) | 4.5–15 mm | ±10% kapa ±1 mm | E ama matla a ho kuta le bokgoni ba kakaretso |
| Botenya ba Flange (t_f) | 6–24 mm | ±10% kapa ±1 mm | Bohlokoa bakeng sa ho hanyetsa le ho satalla ha ho kobeha |
| Bolelele (L) | Tekanyetso ea limithara tse 6–12; e etselitsoe ho fihlela ho limithara tse 24 | +50 / 0 mm | Ha ho mamello e mpe e dumelletsweng bakeng sa mahlakore a sebopeho |
| Ho otloloha | — | ≤ L/1000 | Mohlala: ho kheloha ho hoholo ha 12 mm bakeng sa lehlaseli la 12 m |
| Sekwere sa Flange | — | ≤4% ea bophara ba flange | E netefatsa ho hokahanya le ho kopanya hantle |
| Sotha | — | ≤4 mm/m | Bohlokoa bakeng sa lits'ebetso tsa indasteri le tsa borokho tse nkang nako e telele |
Botšo bo Chesang bo Metsing: Boemo bo tloaelehileng
Ho kenya ka galvanizing ka ho chesa: ≥85μm (ho latela ASTM A123), teko ea spray ea letsoai ≥500h
Ho penta: Pente e metsi e ile ea fafatsoa ka ho lekana holim'a lehlaseli la tšepe ho sebelisoa sethunya sa spray sa pneumatic.
| Sehlopha sa ho iketsetsa | Dikgetho | Tlhaloso | MOQ |
|---|---|---|---|
| Tekanyo | Bophahamo (H), Bophara ba Flange (B), Botenya ba Web le Flange (t_w, t_f), Bolelele (L) | Mefuta e felletseng ea liprofaele tsa IPE/IPN; litekanyo tse ikhethileng le tšebeletso e sehiloeng bolelele lia fumaneha | lithane tse 20 |
| Phekolo ea Bokaholimo | E phutholohile (e ntšo), Ho phatloha ha lehlabathe/ho phatloha ha lithunya, Oli e thibelang mafome, Pente ea Epoxy, Ho kenya galvanizing ka ho chesa | E ntlafatsa ho hanyetsa mafome bakeng sa tikoloho ea kantle, ea indasteri le ea leoatle | lithane tse 20 |
| Ho sebetsa | Ho cheka, ho kenya di-slotting, ho seha ka bevel, ho tjheseletsa, ho sebetsa ka ho lokisa sefahleho, ho lokisa sebopeho sa meaho | E entsoe ka litšoantšo; e loketse libalaka tse jarang mojaro, liforeimi, likholomo le likopano tsa sebopeho sa tšepe | lithane tse 20 |
| Ho tšoaea le ho paka | Ho tšoaea ka mokhoa o ikhethileng, Thapo ea liphutheloana, Li-cap/lipoleiti tse sireletsang, Ho phuthela ho sa keneleng metsi, Moralo oa ho kenya setshelo | E netefatsa hore thepa e tsamaisoa ka mokhoa o sireletsehileng le hore thepa e romelloa ka mokhoa o sebetsang hantle bakeng sa thepa ea likepe, literene kapa literaka. | lithane tse 20 |
Sebopeho sa Moaho: maballo le litšiea bakeng sa mehaho e nang le mekato e mengata, lifeme, matlo a polokelo le marokho a sebetsang e le litho tse ka sehloohong tsa ho jara mojaro.
Boenjiniere ba Borokho: Libalaka tse kholo kapa tsa bobeli bakeng sa marokho a litsela le a maoto.
Thepa e Boima le Tšehetso ea Liindasteri: Mechini e boima le liforomo tsa indasteri li matlafatsoa ke tšehetso.
Matlafatso ea Sebopeho: Phetoho kapa ho lokisa moaho kapa sebopeho se ntlafatsang bokgoni ba wona ba ho jara meroalo kapa dinako tse kgutshwane.
Sebopeho sa Moaho
Boenjiniere ba Borokho
Tšehetso ea Lisebelisoa tsa Liindasteri
Matlafatso ea Meaho
1) Ofisi ea Lekala - tšehetso ea batho ba buang Sepanishe, thuso ea ho tlosa thepa ea lekgetho, jj.
2) Ho na le lithane tse fetang 5,000 tsa setoko, ka mefuta e fapaneng ea boholo
3) E hlahlobiloe ke mekhatlo e nang le matla a ho laela e kang CCIC, SGS, BV, le TUV, ka liphutheloana tse tloaelehileng tse loketseng ho sesa leoatleng
Ho paka
Tšireletso e Felletseng: Thepa ea ho thiba le desiccant ea 2-3 bakeng sa li-I-beams; Maqephe a thepa ea ho thiba mocheso, a sa keneleng metsi a thibela pula ho kena ka har'a li-I-beams.
Tšireletso e kopantsoengBakeng sa sephutheloana se seng le se seng se phuthetsoe ka lebanta la tšepe la 12 - 16 mm, le lekaneng bakeng sa lithane tse 2-3 'me le na le lisebelisoa tsa ho phahamisa tse lumellanang.
Ho ngoloa ha mabitso hantle: Mabitso a lipuo tse peli (Senyesemane le Sepanishe) ho kenyeletsoa le Kereiti, Tlhaloso le khoutu ea HS, Batch # le referense ea tlhahlobo.
Tšireletso ea Boemo bo Phahameng: Mahlasedi a 1 a ≥800 mm ka lera la oli e lekanang le tarpaulin habeli.
Thomello
Thomello e Sireletsehileng: Tšebelisano e Molemohali ea Bakhanni bakeng sa ho sesa ka sekepe se Sireletsehileng (MSK, MSC, COSCO jj).
Taolo ea Boleng: Mahlasedi a ke ke a sisinyeha leroleng 'me u ka tšepa hore a tla fihla a ntse a le teng ho bolelang hore u na le mosebetsi o se nang matšoenyeho.
P: Ke litekanyetso life tseo mehala ea hau ea I e li latelang Amerika Bohareng?
K: mahlasedi a rona a i a dumellana le ASTM A36 le A572 Kereiti ya 50 e amohetsweng Amerika Bohareng. Re ka boela ra fana ka dihlahiswa tse fihlelang maemo a naha (jwalo ka MEXICO NOM) kapa maemo a tshwanang.
P: Ke nako e kae ho isa thepa Panama?
A: Nako ea ho Tsamaisa Thepa ea Leoatleng ho tloha Koung ea Tianjin ho ea Colon Free Trade Zone matsatsi a 28-32. Matsatsi a 45-60 bakeng sa tlhahiso le thomello. Thomello e potlakileng le eona ea fumaneha.
P: Na o na le tumello ya lekgetho?
K: Ehlile, barekisi ba rona ba litsebi ba tla etsa phatlalatso ea lekhetho, tefo ea lekhetho le mosebetsi oohle oa pampiri, thomello le eona e tla ba bonolo.
Aterese
Bl20, Shanghecheng, Shuangjie Street, Beichen District, Tianjin, China
Imeile
Mohala
+86 13652091506
