American Steel Structural Profiles ASTM A36 Ke beam
| Thepa | Tlhaloso / Lintlha |
|---|---|
| Material Standard | ASTM A36 (kakaretso ea sebopeho) |
| Kotulo Matla | ≥250 MPa (36 ksi); Matla a Tensile ≥420 MPa |
| Litekanyo | W8×21 ho W24×104 (inchi) |
| Bolelele | Setoko: 6 m & 12 m; Bolelele bo ikhethileng bo fumaneha |
| Mamello ea Dimensional | E lumellana le GB/T 11263 kapa ASTM A6 |
| Setifikeiti sa Boleng | EN 10204 3.1; Teko ea motho oa boraro ea SGS/BV (ho tiea le ho kobeha) |
| Surface Finish | Li-galvanizing tse chesang, pente, joalo-joalo; customisable |
| Lisebelisoa | Meaho, marokho, meaho ea indasteri, likepe le lipalangoang |
| Tekano ea Khabone (Ceq) | ≤0.45% (e netefatsa ts'ebetso e ntle ea weldability); AWS D1.1 khoutu ea tjheseletsa e tsamaellana |
| Boleng ba Sefahleho | Ha ho mapetsong a bonahalang, mabadi kapa mameno; flatness ≤2 mm / m; bohale perpendicularity ≤1° |
| Thepa | Tlhaloso | Tlhaloso |
|---|---|---|
| Kotulo Matla | ≥250 MPa (36 ksi) | Khatello ea maikutlo moo thepa e qalang deformation ea polasetiki |
| Matla a tšepe | 400–550 MPa (58–80 ksi) | Khatello e phahameng ea khatello pele u robeha tlas'a tsitsipano |
| Elongation | ≥20% | Deformation ea polasetiki e fetang bolelele ba 200 mm |
| Ho thatafala (Brinell) | 119–159 HB | Referense ea boima ba lintho tse bonahalang |
| Khabone (C) | ≤0.26% | E ama matla le weldability |
| Manganese (Mn) | 0.60–1.20% | E matlafatsa matla le ho tiea |
| Sebabole (S) | ≤0.05% | Sebabole se tlase se netefatsa ho tiea ho betere |
| Phosphorus (P) | ≤0.04% | Phosphorous e tlase e ntlafatsa ho tiea |
| Silicon (Si) | ≤0.40% | E eketsa matla le ho thusa deoxidation |
| Sebopeho | botebo (ka hare) | Bophara ba Flange (ka hare) | Botenya ba Marang-rang (ka hare) | Botenya ba Flange (ka) | Boima ba 'mele (lb/ft) |
| W8×21 (Boholo bo Fumaneha) | 8.06 | 8.03 | 0.23 | 0.36 | 21 |
| W8×24 | 8.06 | 8.03 | 0.26 | 0.44 | 24 |
| W10×26 | 10.02 | 6.75 | 0.23 | 0.38 | 26 |
| W10×30 | 10.05 | 6.75 | 0.28 | 0.44 | 30 |
| W12×35 | 12 | 8 | 0.26 | 0.44 | 35 |
| W12×40 | 12 | 8 | 0.3 | 0.5 | 40 |
| W14×43 | 14.02 | 10.02 | 0.26 | 0.44 | 43 |
| W14×48 | 14.02 | 10.03 | 0.3 | 0.5 | 48 |
| W16×50 | 16 | 10.03 | 0.28 | 0.5 | 50 |
| W16×57 | 16 | 10.03 | 0.3 | 0.56 | 57 |
| W18×60 | 18 | 11.02 | 0.3 | 0.56 | 60 |
| W18×64 | 18 | 11.03 | 0.32 | 0.62 | 64 |
| W21×68 | 21 | 12 | 0.3 | 0.62 | 68 |
| W21×76 | 21 | 12 | 0.34 | 0.69 | 76 |
| W24×84 | 24 | 12 | 0.34 | 0.75 | 84 |
| W24×104 (Boholo bo Fumaneha) | 24 | 12 | 0.4 | 0.88 | 104 |
| Paramethara | Tloaelehileng Range | Mamello ea ASTM A6/A6M | Lintlha |
|---|---|---|---|
| Botebo (H) | 100–600 mm (4"–24") | ±3 limilimithara (±1/8") | E tlameha ho lula ka har'a mamello ea boholo ba lebitso |
| Bophara ba Flange (B) | 100–250 mm (4"–10") | ±3 limilimithara (±1/8") | Bophara bo ts'oanang bo tiisa ho jara mojaro o tsitsitseng |
| Botenya ba Marang-rang (tₙ) | 4–13 limilimithara | ±10% kapa ±1 mm (ho sa tsotellehe hore na e kholoanyane) | E ama bokhoni ba ho kuta |
| Botenya ba Flange (t_f) | 6–20 limilimithara | ±10% kapa ±1 mm (ho sa tsotellehe hore na e kholoanyane) | E bohlokoa bakeng sa matla a ho koba |
| Bolelele (L) | 6–12 m e tloaelehileng; tloaelo 15–18 m | +50 / 0 limilimithara | Ha ho tumello ea ho fokotsa ho lumelloa |
| Ho otloloha | - | 1/1000 ea bolelele | mohlala, boholo ba 12 mm camber bakeng sa 12 m baam |
| Flange Squareness | - | ≤4% ea bophara ba flange | E netefatsa welding/ho tsamaisana hantle |
| Sotha | - | ≤4 limilimithara/m | Bohlokoa bakeng sa maballo a nako e telele |
Hot Rolled Black: Boemo bo tloaelehileng
Hot-dip galvanizing: ≥85μm (e lumellana le ASTM A123), tlhahlobo ea spray ea letsoai ≥500h
Ho roala: Pente ea mokelikeli e ile ea fafatsoa ka ho lekana holim'a tšepe ea tšepe ho sebelisoa sethunya sa pneumatic spray.
| Sehlopha sa Customization | Dikgetho | Tlhaloso | MOQ |
|---|---|---|---|
| Boemo | Bophahamo (H), Flange Width (B), Web & Flange Thickness (t_w, t_f), Length (L) | Mefuta e tloaelehileng kapa e sa tloaelehang; tšebeletso ea nako e telele e fumanehang | 20 lithane |
| Phekolo ea Bokaholimo | Joalo ka ha e phuthoa (e ntšo), Ho phatloha ha lehlabathe/Ho phatloha ho thuntsoeng, oli e thibelang mafome, Ho penta/ho roala ka epoxy, Ho futhumatsa | E matlafatsa khanyetso ea kutu libakeng tse fapaneng | 20 lithane |
| Ho sebetsa | Ho cheka, ho betla, ho itšeha ka bevel, ho cheselletsa, ho sebetsa ka sefahleho, tlhophiso ea sebopeho | Ho etsoa ka litšoantšo; e loketseng bakeng sa liforeimi, maballo, likhokahano | 20 lithane |
| Ho tšoaea le ho paka | Ho tšoaea ka tloaelo, Ho kopanya, Lipoleiti tsa ho qetela tse Sireletsang, Ho phuthela ho sa keneleng metsi, moralo oa ho kenya setshelo | E netefatsa ho ts'oaroa le ho romelloa ka mokhoa o bolokehileng, ho loketse ho tsamaisa thepa ea leoatleng | 20 lithane |
-
Mehaho ea Moaho: Litšiea le litšiea bakeng sa mehaho e melelele, lifeme, libaka tsa polokelo le marokho, tse fanang ka tšehetso ea mantlha ea ho jara.
-
Boenjiniere ba Borokho: Libalaka tse ka sehloohong kapa tsa bobeli bakeng sa marokho a likoloi le a maoto.
-
Thepa e boima le Tšehetso ea Indasteri: Tšehetso bakeng sa mechine e meholo le sethala sa indasteri.
-
Matlafatso ea Sebopeho: Ho matlafatsa kapa ho fetola mehaho e teng ho ntlafatsa ho jara le ho kobeha ho hanyetsa.
Sebopeho sa Moaho
Boenjiniere ba Borokho
Tšehetso ea Lisebelisoa tsa Indasteri
Matlafatso ea Sebopeho
1) Ofisi ea Lekala - Tšehetso ea batho ba buang Sepanishe, thuso ea tumello ea meetlo, joalo-joalo.
2) Ho feta lithane tse 5,000 tsa stock tse fumanehang, tse nang le mefuta e mengata e fapaneng
3) E hlahlojoa ke mekhatlo e nang le matla e kang CCIC, SGS, BV, le TUV, e nang le liphutheloana tse tloaelehileng tsa leoatle.
Ho paka
Tšireletso e Felletseng: Li-I-mabala li kopantsoe hammoho le seile e lokiselitsoeng ke lipakete tsa 2-3 tsa desiccant; letlapa le koalang mocheso, le thibelang pula le thibela mongobo.
Tšireletseho ea Bundling: 12-16 mm marapo a tšepe a pota-potileng bongata bo bong le bo bong; e ntle bakeng sa lithane tse 2-3 le lisebelisoa tsa ho phahamisa tse tsamaellanang le US.
Ho Hlakola Ho Ngola: Litabole tsa lipuo tse peli tsa Senyesemane/Sepanishe li na le kereiti, litlhaloso, khoutu ea HS, batch #, le tšupiso ea tlaleho ea tlhahlobo.
Tšireletso e Phahameng ea Boipheliso: Li-I-mabala tse nang le bolelele ba ≥800 mm li ne li koahetsoe ka oli ea ho tsamaisana 'me li phuthetsoe ka makhetlo a mabeli ka seile.
Phano
Thomello e ka tšeptjoang: Tšebelisano le bajari ba molemo ka ho fetisisa (MSK, MSC, COSCO joalo-joalo) ho netefatsa thomello ea polokeho.
Taolo ea Boleng: Ts'ebetso ea ISO 9001; maballo a shejoa ka hloko ho tloha ho paka ho ea ho lipalangoang ho etsa bonnete ba hore a fihla ho uena a ntse a le teng, ho etsa morero o se nang mathata.
P: Litekanyetso tsa li-I-beams tsa hau Amerika Bohareng ke life?
A: Our I Beams e lumellana le ASTM A36 & A572 Grade 50 e sebelisoang haholo Amerika Bohareng. Hape re ka fana ka lihlahisoa tse lumellanang le litlhoko tsa lehae (ke hore, NOM ea Mexico).
P: Ho fihla nako e kae ho isa Panama?
A: Transit Time Sea Freight ho tloha Tianjin Port ho ea Colon Free Trade Zone matsatsi a 28-32 wks. Tlhahiso le ho fana ka kakaretso ke matsatsi a 45-60. Ho ka hlophisoa thomello e potlakileng hape.
P: A na u thusa ka tumello ea lekhetho?
A: E, barekisi ba rona ba litsebi ba tla etsa phatlalatso ea meetlo, ba lefe lekhetho le mosebetsi oohle oa pampiri ho etsa bonnete ba hore ho tsamaisoa hantle.
Aterese
Bl20, Shanghecheng, Shuangjie Street, Beichen District, Tianjin, China
Mohala
+86 13652091506
