Steel Manufacturing Type Supplier Rolled Hot Rolled Larssen China U Steel Pipe Pile Construction
PRODUCT SIZE
*Send the email to chinaroyalsteel@163.com to get a quotation for your projects
|
Steel Grade
|
S275,S355,S390,S430,SY295,SY390,ASTM A690
|
|
standard
|
EN10248,EN10249,JIS5528,JIS5523,ASTM,GB/T 20933-2014
|
|
Delivery time
|
10~20 Days
|
|
Certificates
|
ISO9001,ISO14001,ISO18001,CE FPC
|
|
Length
|
6m-24m,9m,12m,15m,18m are common export length
|
|
Type
|
|
|
Processing Service
|
Punching, Cutting
|
|
Technique
|
Hot Rolled,Cold Rolled
|
|
Dimensions
|
PU400x100 PU400x125 PU400x150 PU400x170 PU500x200 PU500x225 PU600x130 PU600x180 PU600x210
|
|
Interlock types
|
Larssen locks,cold rolled interlock,hot rolled interlock
|
|
Length
|
1-12 meter or customized length
|
|
Application |
river bank,harbour pier,municipal facilities,urban tube corridor,seismic reinforcement,bridge pier,bearing foundation,underground
garage,foundation pit cofferdam,road widening retaining wall and temporary works. |
| Section | Width | Height | Thickness | Cross Sectional Area | Weight | Elastic Section Modulus | Moment of Inertia | Coating Area (both sides per pile) | ||
|---|---|---|---|---|---|---|---|---|---|---|
| (w) | (h) | Flange (tf) | Web (tw) | Per Pile | Per Wall | |||||
| mm | mm | mm | mm | cm2/m | kg/m | kg/m2 | cm3/m | cm4/m | m2/m | |
| Type II | 400 | 200 | 10.5 | - | 152.9 | 48 | 120 | 874 | 8,740 | 1.33 |
| Type III | 400 | 250 | 13 | - | 191.1 | 60 | 150 | 1,340 | 16,800 | 1.44 |
| Type IIIA | 400 | 300 | 13.1 | - | 186 | 58.4 | 146 | 1,520 | 22,800 | 1.44 |
| Type IV | 400 | 340 | 15.5 | - | 242 | 76.1 | 190 | 2,270 | 38,600 | 1.61 |
| Type VL | 500 | 400 | 24.3 | - | 267.5 | 105 | 210 | 3,150 | 63,000 | 1.75 |
| Type IIw | 600 | 260 | 10.3 | - | 131.2 | 61.8 | 103 | 1,000 | 13,000 | 1.77 |
| Type IIIw | 600 | 360 | 13.4 | - | 173.2 | 81.6 | 136 | 1,800 | 32,400 | 1.9 |
| Type IVw | 600 | 420 | 18 | - | 225.5 | 106 | 177 | 2,700 | 56,700 | 1.99 |
| Type VIL | 500 | 450 | 27.6 | - | 305.7 | 120 | 240 | 3,820 | 86,000 | 1.82 |
Section Modulus Range
1100-5000cm3/m
Width Range (single)
580-800mm
Thickness Range
5-16mm
Production Standards
BS EN 10249 Part 1 & 2
Steel Grades
SY295, SY390 & S355GP for Type II to Type VIL
S240GP, S275GP, S355GP & S390 for VL506A to VL606K
Length
27.0m maximum
Standard Stock Lengths of 6m, 9m, 12m, 15m
Delivery Options
Single or Pairs
Pairs either loose, welded or crimped
Lifting Hole
By container (11.8m or less) or Break Bulk
Corrosion Protection Coatings
PRODUCT USE
The main role of 500 x 200 u sheet pile includes the following aspects:
1. Support the weight of the building. As a foundation material, foundation piles can carry the weight of a building or other structure and transfer it to a deeper level underground, thus ensuring the stability and safety of the building.
2. Prevent soil sliding and collapse. By embedding the supporting system into the soil, steel sheet piles can prevent soil sliding and collapse, thus ensuring the stability of buildings or other structures.
3. Cofferdam and slope protection. In the coastline or coastal areas along the river, metal sheet pilee widely used in cofferdams and slope protection structures, which play a role in preventing soil erosion and seawater erosion.
4. Pumping precipitation. In some cases, the land needs to be dewatering or pumping treatment, steel sheet piles can be used as supporting materials for facilities such as pipelines or water outlets, so as to effectively achieve the corresponding engineering requirements.
FEATURES
Precautions for steel sheet piles construction
(1) When hanging the pile, use a special wire rope and lock QQ to tighten the pile body, and gently lift and release. Before pulling, check whether the vibrator is clamped to prevent the failure of the vibrator to damage the steel plate or cause accidents.
(2) The ground of the crane operation point should be flat, and the ground should be flat to prevent rollover accidents. If the ground is soft, the bottom of the supporting foot should be paved.
Do the support with digging, do it in time, do not delay. The support shall be horizontal and straight, and shall not be inclined (3) bent. Pay attention to the safety of hot operation and deep foundation pit operation when burning and welding support.
(4) Check whether the steel sheet pile and support are intact at any time, and repair welding should be timely found that the loose is found, and the bending should be reinforced in time and safety measures should be taken
5) In order to achieve closed closure in the construction of the corner, the corner pile must be set.
PACKAGING AND SHIPPING
COMPANY STRENGTH
Made in China, first-class service, cutting-edge quality, world-renowned
1. Scale effect: Our company has a large supply chain and a large steel factory, achieving scale effects in transportation and procurement, and becoming a steel company that integrates production and services
2. Product diversity: Product diversity, any steel you want can be purchased from us, mainly engaged in steel structures, steel rails, steel sheet piles, photovoltaic brackets, channel steel, silicon steel coils and other products, which makes it more flexible Choose the desired product type to meet different needs.
3. Stable supply: Having a more stable production line and supply chain can provide more reliable supply. This is especially important for buyers who require large quantities of steel.
4. Brand influence: Have higher brand influence and larger market
5. Service: A large steel company that integrates customization, transportation and production
6. Price competitiveness: reasonable price
*Send the email to chinaroyalsteel@163.com to get a quotation for your projects
CUSTOMERS VISIT
FAQ
1.How can I get a quotation from you ?
You can leave us message, and we will reply every message in time.
2.Will you delivery the goods on time?
Yes,we promise to provide best quality products and delivery on time. Honesty is our company's tenet.
3.Can I get samples before order ?
Yes, of course. Usually our samples are free,we can produce by your samples or technical drawings.
4.What is your payment terms?
Our usual payment term is 30% deposit, and rest against B/L. EXW, FOB,CFR, CIF.
5.Do you accept the third party inspection?
Yes absolutely we accept.
6.How do we trust your company?
We specialise in steel business for years as golden supplier, headquarter locates in Tianjin province, welcome to investigate in any ways, by all means.
