English

Ductile Cast Iron Pipes Theko ea T Mofuta o Kopanetsoeng oa Phala ea Tšepe bakeng sa Phepelo ea Metsi a Ka tlas'a Lefatše Di Pipe K7 K9 C25 C30

Ductile Cast Iron Pipes Theko ea T Mofuta o Kopanetsoeng oa Phapa ea Tšepe bakeng sa Phepelo ea Metsi a Ka tlas'a Lefatše Di Pipe K7 K9 C25 C30 Setšoantšo se Featured
  • Ductile Cast Iron Pipes Theko ea T Mofuta o Kopanetsoeng oa Phala ea Tšepe bakeng sa Phepelo ea Metsi a Ka tlas'a Lefatše Di Pipe K7 K9 C25 C30
  • Ductile Cast Iron Pipes Theko ea T Mofuta o Kopanetsoeng oa Phala ea Tšepe bakeng sa Phepelo ea Metsi a Ka tlas'a Lefatše Di Pipe K7 K9 C25 C30
  • Ductile Cast Iron Pipes Theko ea T Mofuta o Kopanetsoeng oa Phala ea Tšepe bakeng sa Phepelo ea Metsi a Ka tlas'a Lefatše Di Pipe K7 K9 C25 C30
  • Ductile Cast Iron Pipes Theko ea T Mofuta o Kopanetsoeng oa Phala ea Tšepe bakeng sa Phepelo ea Metsi a Ka tlas'a Lefatše Di Pipe K7 K9 C25 C30
  • Ductile Cast Iron Pipes Theko ea T Mofuta o Kopanetsoeng oa Phala ea Tšepe bakeng sa Phepelo ea Metsi a Ka tlas'a Lefatše Di Pipe K7 K9 C25 C30

Tlhaloso e Khutšoanyane:

Liphaephe tsa tšepe tsa nodular, tseo hape li bitsoang ductile iron kapa cast iron steel pipes, li kopanyamatla a tshepeleboima ba tshepe. Graphite e tengsebopeho se chitja(limaraka 6–7) le aboemo ba spheroidization ea 1-3le tekanyo ≥80%, ho ntlafatsa thepa ea mochine. Ka mor'a annealing, microstructure ke haholo-holoferrite e nang le pearlite e nyane, e fana ka matla a babatsehang le ho tšoarella nako e telele.


  • Tloaelo:ISO2531/EN545/EN598
  • Boitsebiso:Ductile Cast Iron GGG50
  • Bolelele:5.7m,6m
  • Setifikeiti:ISO9001, BV, WRAS, BSI
  • Mofuta:E cheselitsoe, mofuta oa T, e thibetsoe
  • Kopo:Morero oa phepelo ea metsi, drainage, likhoerekhoere, nosetso, lipeipi tsa metsi.
  • Iteanye le rona:+86 13652091506
  • : [imeile e sirelelitsoeng]
    • WhatsApp

    Lintlha tsa Sehlahisoa

    Li-tag tsa Sehlahisoa

    Lintlha tsa Sehlahisoa

    The nodular cast iron, ductile iron kapa cast iron iron pipe ke thepa e kopantsoeng e sebelisang ductility ea tšepe le matla a tšepe. Spheroidized structured graphite e boetse e fumaneha ka sebopeho sa spherical (limaraka tsa 6-7) ka tekanyo ea spheroidization ea 1-3 le tekanyo ea ≥80%, e ntlafatsang thepa ea mechine. Ka mor'a phekolo ea mocheso, microstructure ke haholo-holo ferrite e nang le pearlite e nyenyane, e na le matla a matle le ho hanyetsa ho apara.

    peipi ea tšepe e entsoeng ka nodular (4)

    Lihlahisoa tsohle tse hlalositsoeng li ka etsoa ho latela litlhoko tsa bareki
    1. Boholo 1)DN80 ~ 2600mm
      2) 5.7M/6M kapa ha ho hlokahala
    2. Maemo: ISO2531, EN545, EN598, joalo-joalo
    3.Material Ductile Cast Iron GGG50
    4. Sebaka sa feme ea rona Tianjin, China
    5. Tšebeliso: 1)Metsi a litoropo
      2) liphaephe tse khelosang
      3) tsa temo
    6. Koala ka hare: a). Seretse sa samente sa Portland

    b). Seretse sa samente se hanyetsanang le sulphate

    c). Lerako la seretse sa samente sa Aluminium e phahameng

    d). Sekoaelo sa epoxy se kopantsoeng le Fusion

    e). Pente ea epoxy ea metsi

    f). Pente e ntšo ea sekontiri
    7. Ho roala ka ntle: . zinki+sekontiri(70microns) ho penta

    . Sekoaelo sa epoxy se kopantsoeng le Fusion

    c). Zinc-aluminium alloy+liquid epoxy penta
    8. Mofuta: Welded
    9. Tshebeletso ya Tshebetso Ho tjheseletsa, ho Kobeha, Ho phunya, ho qhibidiha, ho seha
    10. MOQ 1 Ton
    11. Thomello: Lingata, ka bongata,

    peipi ea tšepe e entsoeng ka nodular (5) peipi ea tšepe e entsoeng ka nodular (6)

    1.Ho hanyetsa Khatello ea ka hare: Khatello e phahameng ea ho sebetsa ka khatello e phatlohileng ka makhetlo a mararo khatello ea ho sebetsa, ho fana ka tšireletso e babatsehang.

    2.Ho hanyetsa Khatello ea Kantle: Ho hanyetsa ka matla ka ntle ho khatello ho felisa tlhokahalo ea libethe tse khethehileng kapa sekoahelo se sireletsang, kahoo se lebisa tlhokomelong e ka tšeptjoang le ea moruo.

    3. Inner Layer of Anti-Corrosion: Centrifugal cement mortar line (ISO 4179) ke lera le boreleli, le tsitsitseng le ka hare le sireletsang metsi a nooang.

    4.Filimi e sireletsang: Ho fafatsa ka zinki (≥130 g/m², ISO 8179) ka sekoaelo sa pente ea resin e hloekisitsoeng ho ntlafatsa thepa e thibelang mafome. Liaparo tse teteaneng tsa zinki kapa zinki-aluminium li ka fanoa e le khetho ho latela litlhoko tsa bareki.

    peipi ea tšepe e entsoeng ka nodular (8)

    Likaroloana

    Tšepe ea ductile, sehlahisoa sa tšepe e entsoeng ka tšepe, se na le matla a tšepe, 'me ho na le ductility le ho tiea ha tšepe. Bakeng sa spheroidization, phekolo sethaleng sa 1-3 (tekanyo ≥80%) e sebelisetsoa ho ntlafatsa thepa ea mechine. Liphaephe tse kentsoeng li na le pearlite leha e le efe ka har'a matrix ea ferrite e etsang hore e be ntle ka ho fetisisa ho hanyetsa kutu, ductility, ts'ebetso ea ho tiisa le ho khoneha ho kenya kapele.

    Microstructure: Spheroidal graphite ka matrix ea ferrite-pearlite. Palo ea pearlite e itšetlehile ka bophara ba pipe : <≤20%< bakeng sa liphaephe tse nyenyane tsa bophara le ~ 25% bakeng sa liphaephe tse kholo tsa bophara. Motsoako ona o ikhethang oa thepa o etsa phala ea tšepe ea ductile peipi e ratoang bakeng sa metsi a seno, mouoane le khase e omileng ts'ebelisong ea khoebo le indasteri.

    Kopo

    Liphaephe tsa tšepe tsa ductile tsa boholo ba bophara ba 80 ho isa ho 1600 mm li fumaneha bakeng sa metsi a nooang (BS EN 545) le bakeng sa lisebelisoa tse sa hatelletsoeng tse kang likhoerekhoere (BS EN 598). Li alima li-joints tse bonolo, li behiloe maemong 'ohle a leholimo, hangata ntle le libethe tse khethehileng,' me li fana ka ntlha e phahameng ea tšireletso le ho feto-fetoha ha maemo ho lekaneng ho amohela metsamao ea fatše, litšoaneleho tse tlatselitseng ho li etsa thepa e khethiloeng bakeng sa mefuta e mengata ea liphaephe.

    peipi ea tšepe e entsoeng ka nodular (14)

    Mokhoa oa Tlhahiso

    peipi ea tšepe e entsoeng ka nodular (12)
    peipi ea tšepe e entsoeng ka nodular (13)

    Packaging & Shipping

    peipi ea tšepe e entsoeng ka nodular (15)
    peipi ea tšepe e entsoeng ka nodular (8)
    Molumo oa Leqephe la Leqephe la Metsi a Chesang a Setopong sa U-Stop (12)-tuya
    Molumo oa Leqephe la Tšepe la Metsi a Chesang a Setopong sa U-Stop (13)-tuya
    Leqephe la Leqephe la Tshipi le Kgethehileng la Metsi a Chesang-Setopo sa U-Stop (14)-tuya
    Molumo oa Leqephe la Tšepe la Metsi a Chesang-Setopo sa U-Stop (15)-tuya

    LBH

    1. Nka fumana mantsoe a qotsitsoeng joang ho uena?
    U ka re siela molaetsa, 'me re tla araba molaetsa o mong le o mong ka nako.

    2.Na u tla tlisa thepa ka nako?
    E, re tšepisa ho fana ka lihlahisoa tsa boleng bo holimo le ho fana ka thepa ka nako. Botšepehi ke molao oa k'hamphani ea rona.

    3.Na nka fumana disampole pele odara?
    Ehlile ho joalo. Hangata lisampole tsa rona ke tsa mahala, re ka li hlahisa ka lisampole tsa hau kapa lits'oants'o tsa tekheniki.

    4.Lipehelo tsa hau tsa tefo ke life?
    Nako ea rona e tloaelehileng ea ho patala ke 30% depositi, 'me re phomola khahlanong le B/L.

    5.Na u amohela tlhahlobo ea motho oa boraro?
    Ee ruri re amohela.

    6.Re tšepa k'hamphani ea hau joang?
    Re sebetsa ka ho khetheha khoebong ea tšepe ka lilemo tse ngata re le mofani oa thepa ea khauta, ntlo-khōlō e sebakeng sa setereke sa Tianjin, re amohelehile ho etsa lipatlisiso ka litsela leha e le life, ka mekhoa eohle.

  • E fetileng:
  • E 'ngoe:
    • Ngola molaetsa wa hao mona mme o re romele wona

    Lihlopha tsa lihlahisoa

    Whatsapp Whatsapp: 8613652091506 Ikopanye Ikopanye le Rona: + 8613652091506 E-mail E-mail:[imeile e sirelelitsoeng] Marang-rang Molaetsa oa Inthaneteng