American Steel Structural Profiles ASTM A992 Ke beam
| Thepa | Tlhaloso / Lintlha |
|---|---|
| Material Standard | ASTM A36 (kakaretso ea sebopeho) |
| Kotulo Matla | ≥250 MPa (36 ksi); Matla a Tensile ≥420 MPa |
| Litekanyo | W8×21 ho W24×104 (inchi) |
| Bolelele | Setoko: 6 m & 12 m; Bolelele bo ikhethileng bo fumaneha |
| Mamello ea Dimensional | E lumellana le GB/T 11263 kapa ASTM A6 |
| Setifikeiti sa Boleng | EN 10204 3.1; Teko ea motho oa boraro ea SGS/BV (ho tiea le ho kobeha) |
| Surface Finish | Li-galvanizing tse chesang, pente, joalo-joalo; customisable |
| Lisebelisoa | Meaho, marokho, meaho ea indasteri, likepe le lipalangoang |
| Tekano ea Khabone (Ceq) | ≤0.45% (e netefatsa ts'ebetso e ntle ea weldability); AWS D1.1 khoutu ea tjheseletsa e tsamaellana |
| Boleng ba Sefahleho | Ha ho mapetsong a bonahalang, mabadi kapa mameno; flatness ≤2 mm / m; bohale perpendicularity ≤1° |
| Thepa | Tlhaloso | Tlhaloso |
|---|---|---|
| Kotulo Matla | ≥250 MPa (36 ksi) | Khatello ea maikutlo moo thepa e qalang deformation ea polasetiki |
| Matla a tšepe | 400–550 MPa (58–80 ksi) | Khatello e phahameng ea khatello pele u robeha tlas'a tsitsipano |
| Elongation | ≥20% | Deformation ea polasetiki e fetang bolelele ba 200 mm |
| Ho thatafala (Brinell) | 119–159 HB | Referense ea boima ba lintho tse bonahalang |
| Khabone (C) | ≤0.26% | E ama matla le weldability |
| Manganese (Mn) | 0.60–1.20% | E matlafatsa matla le ho tiea |
| Sebabole (S) | ≤0.05% | Sebabole se tlase se netefatsa ho tiea ho betere |
| Phosphorus (P) | ≤0.04% | Phosphorous e tlase e ntlafatsa ho tiea |
| Silicon (Si) | ≤0.40% | E eketsa matla le ho thusa deoxidation |
| Sebopeho | botebo (ka hare) | Bophara ba Flange (ka hare) | Botenya ba Marang-rang (ka hare) | Botenya ba Flange (ka) | Boima ba 'mele (lb/ft) |
| W8×21 (Boholo bo Fumaneha) | 8.06 | 8.03 | 0.23 | 0.36 | 21 |
| W8×24 | 8.06 | 8.03 | 0.26 | 0.44 | 24 |
| W10×26 | 10.02 | 6.75 | 0.23 | 0.38 | 26 |
| W10×30 | 10.05 | 6.75 | 0.28 | 0.44 | 30 |
| W12×35 | 12 | 8 | 0.26 | 0.44 | 35 |
| W12×40 | 12 | 8 | 0.3 | 0.5 | 40 |
| W14×43 | 14.02 | 10.02 | 0.26 | 0.44 | 43 |
| W14×48 | 14.02 | 10.03 | 0.3 | 0.5 | 48 |
| W16×50 | 16 | 10.03 | 0.28 | 0.5 | 50 |
| W16×57 | 16 | 10.03 | 0.3 | 0.56 | 57 |
| W18×60 | 18 | 11.02 | 0.3 | 0.56 | 60 |
| W18×64 | 18 | 11.03 | 0.32 | 0.62 | 64 |
| W21×68 | 21 | 12 | 0.3 | 0.62 | 68 |
| W21×76 | 21 | 12 | 0.34 | 0.69 | 76 |
| W24×84 | 24 | 12 | 0.34 | 0.75 | 84 |
| W24×104 (Boholo bo Fumaneha) | 24 | 12 | 0.4 | 0.88 | 104 |
| Paramethara | Tloaelehileng Range | Mamello ea ASTM A6/A6M | Lintlha |
|---|---|---|---|
| Botebo (H) | 100–600 mm (4"–24") | ±3 limilimithara (±1/8") | E tlameha ho lula ka har'a mamello ea boholo ba lebitso |
| Bophara ba Flange (B) | 100–250 mm (4"–10") | ±3 limilimithara (±1/8") | Bophara bo ts'oanang bo tiisa ho jara mojaro o tsitsitseng |
| Botenya ba Marang-rang (tₙ) | 4–13 limilimithara | ±10% kapa ±1 mm (ho sa tsotellehe hore na e kholoanyane) | E ama bokhoni ba ho kuta |
| Botenya ba Flange (t_f) | 6–20 limilimithara | ±10% kapa ±1 mm (ho sa tsotellehe hore na e kholoanyane) | E bohlokoa bakeng sa matla a ho koba |
| Bolelele (L) | 6–12 m e tloaelehileng; tloaelo 15–18 m | +50 / 0 limilimithara | Ha ho tumello ea ho fokotsa ho lumelloa |
| Ho otloloha | - | 1/1000 ea bolelele | mohlala, boholo ba 12 mm camber bakeng sa 12 m baam |
| Flange Squareness | - | ≤4% ea bophara ba flange | E netefatsa welding/ho tsamaisana hantle |
| Sotha | - | ≤4 limilimithara/m | Bohlokoa bakeng sa maballo a nako e telele |
Hot Rolled Black: Boemo bo tloaelehileng
Hot-dip galvanizing: ≥85μm (e lumellana le ASTM A123), tlhahlobo ea spray ea letsoai ≥500h
Ho roala: Pente ea mokelikeli e ile ea fafatsoa ka ho lekana holim'a tšepe ea tšepe ho sebelisoa sethunya sa pneumatic spray.
| Sehlopha sa Customization | Dikgetho | Tlhaloso | MOQ |
|---|---|---|---|
| Boemo | Bophahamo (H), Flange Width (B), Web & Flange Thickness (t_w, t_f), Length (L) | Mefuta e tloaelehileng kapa e sa tloaelehang; tšebeletso ea nako e telele e fumanehang | 20 lithane |
| Phekolo ea Bokaholimo | Joalo ka ha e phuthoa (e ntšo), Ho phatloha ha lehlabathe/Ho phatloha ho thuntsoeng, oli e thibelang mafome, Ho penta/ho roala ka epoxy, Ho futhumatsa | E matlafatsa khanyetso ea kutu libakeng tse fapaneng | 20 lithane |
| Ho sebetsa | Ho cheka, ho betla, ho itšeha ka bevel, ho cheselletsa, ho sebetsa ka sefahleho, tlhophiso ea sebopeho | Ho etsoa ka litšoantšo; e loketseng bakeng sa liforeimi, maballo, likhokahano | 20 lithane |
| Ho tšoaea le ho paka | Ho tšoaea ka tloaelo, Ho kopanya, Lipoleiti tsa ho qetela tse Sireletsang, Ho phuthela ho sa keneleng metsi, moralo oa ho kenya setshelo | E netefatsa ho ts'oaroa le ho romelloa ka mokhoa o bolokehileng, ho loketse ho tsamaisa thepa ea leoatleng | 20 lithane |
-
Mehaho ea Moaho: Litšiea le litšiea bakeng sa mehaho e melelele, lifeme, libaka tsa polokelo le marokho, tse fanang ka tšehetso ea mantlha ea ho jara.
-
Boenjiniere ba Borokho: Libalaka tse ka sehloohong kapa tsa bobeli bakeng sa marokho a likoloi le a maoto.
-
Thepa e boima le Tšehetso ea Indasteri: Tšehetso bakeng sa mechine e meholo le sethala sa indasteri.
-
Matlafatso ea Sebopeho: Ho matlafatsa kapa ho fetola mehaho e teng ho ntlafatsa ho jara le ho kobeha ho hanyetsa.
Sebopeho sa Moaho
Boenjiniere ba Borokho
Tšehetso ea Lisebelisoa tsa Indasteri
Matlafatso ea Sebopeho
1) Ofisi ea Lekala - Tšehetso ea batho ba buang Sepanishe, thuso ea tumello ea meetlo, joalo-joalo.
2) Ho feta lithane tse 5,000 tsa stock tse fumanehang, tse nang le mefuta e mengata e fapaneng
3) E hlahlojoa ke mekhatlo e nang le matla e kang CCIC, SGS, BV, le TUV, e nang le liphutheloana tse tloaelehileng tsa leoatle.
Ho paka
-
Tšireletso e Feletseng: Li-I-mabala a phuthetsoe ka tarpaulin e nang le lipakete tsa 2-3 tsa desiccant; mocheso o tiisitsoeng, lesela le sa keneleng pula le thibela mongobo.
-
Secure Bundling: Lithapo tsa tšepe tsa 12-16 mm ka bongata; e bolokehile bakeng sa lithane tse 2-3 mme e lumellana le lisebelisoa tsa ho phahamisa tsa US.
-
Hlakola Labeling: Lileibole tsa lipuo tse peli (Senyesemane/Sepanishe) li kenyelletsa kereiti, lintlha, khoutu ea HS, batch #, le referense ea tlaleho ea liteko.
-
Tšireletso e kholo ea Profile: Li-I-beams ≥800 mm bophahamo bo koahetsoeng ka oli ea ho tsamaisana le ho koaheloa habeli ka seile.
Phano
-
Tšepahalang ho Shipping: Likamano le bajari ba etellang pele (MSK, MSC, COSCO, joalo-joalo) li netefatsa lipalangoang tse sireletsehileng.
-
Netefaletso ea boleng: Ts'ebetso e lumellanang le ISO 9001; ho beha leihlo ka hloko ho tloha ho paka ho ea ho lipalangoang ho netefatsa hore maballo a fihla maemong a phethahetseng, a ts'ehetsa ts'ebetso ea projeke e boreleli.
P: Ke litekanyetso life tseo li-I-beams tsa hau li kopanang le tsona bakeng sa Amerika Bohareng?
A:Li-I-mabala a rona a lumellana leASTM A36leA572 Sehlopha sa 50, e sebelisoang haholo Amerika Bohareng. Hape re ka fana ka lihlahisoa tse kopanang le maemo a lehae, joalo kaNOM ea Mexico.
P: Nako ea ho fihla Panama ke efe?
A:Thepa e tsoang leoatleng ho tloha Tianjin Port ho ea Colon Free Trade Zone e nkaMatsatsi a 28-32. Kakaretso ea phano, ho kenyelletsa tlhahiso le tumello, keMatsatsi a 45-60. Ho romelloa ka potlako ho boetse ho teng.
P: A na u thusa ka tumello ea lekhetho?
A:E, ea ronabarekisi ba litsebisebetsana le liphatlalatso tsa lekhetho, makhetho le litokomane ho netefatsa hore li tsamaisoa ka thelelo.
Aterese
Bl20, Shanghecheng, Shuangjie Street, Beichen District, Tianjin, China
Mohala
+86 13652091506
